What's new

Every release, newest first. The website and the apps share one viewer, so a change listed here reaches all of them; the version number is the one BigData for Windows reports under Help, then About.

Download for Windows · Help

Version 1.0.26 2026-10-31

  • New Gauge warnings work on the low side too: every gauge and warning light has a low yellow and a low red (at or below) next to the high pair, so it can warn when a value runs too high, too low, or both. Dials and bars draw the low bands, a light turns amber then red, and a Number gauge tints its tile. A blank field is off.

Version 1.0.25 2026-10-30

  • Changed Cam timing follows more logs: besides Intake / Exhaust Cam Angle it reads the VCT Cam Phase Angle channels, SCT’s “variable valve timing … actual” and VCT1_INTP / VCT1_EXHP, MoTeC’s VTC Bank 1 Position, the bank 2 channels and other cam angle or position names.
  • Fixed Cam timing no longer follows a cam channel the vehicle does not answer: some logs read 169° or 400° in a VCT phase angle for the whole log, and the panel now passes over it for the next channel. The INT CAM / EXH CAM gauges read Cam Angle before the phase angle for the same reason.

Version 1.0.24 2026-10-30

  • New Cam timing adds the F-150 5.0: 2011-14, 2015-17, 2018-20 and 2021+, worked out from the trucks’ own tunes (and L&M’s stock 210° / 212° for the 2021+), plus GSC’s F-150 cams for 2018-20. A truck picked in the vehicle record opens on its generation.

Version 1.0.23 2026-10-30

  • New Cam timing has more models: GT350, and — marked provisional — Boss 302, GT500, F-150 Raptor R and Mustang GTD (the last three share the same cams). A GT350 or 2020-22 GT500 log opens on its own model from the VIN.
  • Changed Cam timing: the stock 2018-23 Mustang GT cam is now L&M’s measured stock card at .050" (210.6° / 212.5°, centrelines 109 / 123) instead of an estimate, drawn with its real asymmetric lobes. The calibration-events entry is still in the list.
  • Changed Cam timing: the 2011-14 and 2015-17 stock exhausts park at 125° BTDC, L&M’s figure, which puts every stock exhaust event 2° earlier.
  • New Cam timing: L&M’s LM-C18-IO-1, LM-GT3F-1 and LM-20GT5-NSR cams added. Comp cams now use Comp’s printed valve lift.
  • Fixed Cam timing: cams with asymmetric lobes now show their real centreline. L&M’s LM-C11-IO read 135.5° instead of its 129°.

Version 1.0.22 2026-10-30

  • Changed Cam timing: pick the model first, then its generation (the year range) from a second list, ready for more models alongside the Mustang GT.

Version 1.0.21 2026-10-30

  • Fixed Cam timing: on 2015-and-later Coyotes the intake now goes 50° either side of park. It stopped at 20° advanced, which tunes go well past.
  • Changed Cam timing beside a log: Camshaft B starts folded to its title bar to save height; click it to open. A cam picked for B is still drawn while folded.
  • Changed Cam timing: the panel shows no notes at all now, just the numbers, the graph and any warnings. The line beside Follow the log is just the intake and exhaust positions, so it stays on one line.

Version 1.0.20 2026-10-30

  • Changed Cam timing: the notes on where each engine’s and each cam’s figures came from are gone from the panel, leaving the numbers, the graph and the warnings.

Version 1.0.19 2026-10-30

  • Changed On alldatalogs.com the menu bar at the top of a log stays open, as it does in the Windows app, instead of hiding until you hover the strip.
  • Fixed Cam timing: the follower ratio now follows the engine. 2018-on Coyotes use 1.89, the figure on GSC’s Gen 3 cam cards, instead of 2.01 for every generation.
  • New Cam timing: a light grey dashed line marks TDC on the valve-lift graph, and the crank-angle axis always labels TDC.

Version 1.0.18 2026-10-30

  • New Cam timing is in the Windows app, for Pro: under Analyze while a log is open, the same as on alldatalogs.com.
  • Fixed Cam timing opened from a log takes its own column on the right and the log narrows to fit beside it, instead of covering the right-hand end of the graphs. Close it and the log gets the full width back.

Version 1.0.17 2026-10-29

  • Fixed On alldatalogs.com, Cam timing opened from a log no longer covers it. It always docks beside the graphs, so the log can still be scrolled and clicked; before, a log with no cam channels got a full-screen pop-up.
  • Fixed Cam timing opens on the car’s own engine: a Mustang log whose file name carries its VIN, as HP Tuners names them, picks the generation from the model year, so a 2024 log opens on Gen 4 instead of whatever was picked last.
  • New Cam timing lists aftermarket cams: L&M and GSC grinds for Gen 3, GSC for Gen 4, and Comp’s Gen 3 range, which takes the intake centreline from your cam card. “Your own cam card” takes the durations and centrelines off any card.
  • Changed Cam timing: the stock Gen 3 and Gen 4 cams now default to an estimate at .050", so they compare like for like with aftermarket cams. No .050" figure is published for either engine, so the estimate is marked as one; the figures read from the calibration are still in the list.

Version 1.0.16 2026-10-29

  • Fixed On alldatalogs.com, the Cam timing sliders now drag the whole way in one go. Only the number moves while you drag, and the diagram redraws when you let go — they used to move a notch at a time.

Version 1.0.15 2026-10-29

  • New Cam timing has its own page on alldatalogs.com, so it can be used for reference without opening a log.
  • New On alldatalogs.com, Cam timing opened from Analyze with a log loaded docks beside the graphs and follows the cursor: camshaft A’s phaser positions come from the log’s Intake Cam Angle and Exhaust Cam Angle as you move through it.

Version 1.0.14 2026-10-29

  • Changed Cam timing is a Pro feature on alldatalogs.com while it is refined, and has been taken out of the Windows app for now. It comes back to the Windows app once it is finished.

Version 1.0.13 2026-10-29

  • New Cam timing for Ti-VCT engines, under Analyze. Pick the engine and a camshaft, move the phasers, and read the valve events, centrelines, overlap and installed separation, with a valve-lift diagram against crank angle. No log needed.
  • New Two camshafts at once: the second is drawn over the first, dashed, with the difference in every figure beside it.
  • New Gen 1 through Gen 4 Mustang GT, with each generation’s own park position and phaser travel, plus the Comp Cams grinds for Gen 1 and Gen 2. Every cam says where its numbers came from and at what checking height, because Ford publishes valve lift for these engines and nothing else.

Version 1.0.12 2026-10-05

  • New Comparing two logs now shows the second log’s value, not just its dashed line. Every channel in the graph legend reads both at once, the comparison smaller and underlined with the same dashes as its trace.
  • Changed The comparison value is read at the second log’s own time, so nudging the alignment moves the number with the trace, and it reads -- where the cursor is past the end of that recording instead of holding its last value.
  • Changed When the second log calls a channel something else, its value is marked with ≈ and names the channel it actually read on hover.

Version 1.0.11 2026-09-21

  • Changed Dyno runs are now listed everywhere the other formats are, in this manual and on the website, including the list of file types Windows opens in BigData by double-click.

Version 1.0.10 2026-09-21

  • New Chassis dyno runs open. Drag a .TRB run file in and it charts like any log, with engine rpm, power, torque, road speed, the weather channels and both wideband channels named and on their usual gauges.
  • Changed A dyno channel the run file does not name is listed as Dyno Slot and a number rather than being left out, so nothing recorded on the run is hidden from you.

Version 1.0.9 2026-09-15

  • Fixed Logs that name their channels by SAE PID now map like any other: Short Term Fuel Trim 1 (SAE), Long Term Fuel Trim 1 (SAE), the SAE accelerator pedal and Intake Manifold Absolute Pressure (SAE) find their gauges, default graphs and scorecard categories.
  • Fixed Layouts, histograms and math channels built on a log that says Engine RPM or WB EQ Ratio Bank 1 now find the same channel on a log that says Engine RPM (SAE) or WB EQ Ratio 1 (SAE), so the graphs come up and the tables fill in instead of showing missing parameter.

Version 1.0.8 2026-09-11

  • Fixed Switching to a Layout that brings its own gauges now shows those gauges by their real name in the Custom Gauges menu. It used to keep the name of the gauges you had before, so editing and saving the new gauges wrote them over the old set.
  • Fixed Saving gauges never replaces a different saved set without asking. When the gauges on screen no longer match the set they are named after, Save asks for a name, and typing the name of a set with different gauges asks before replacing it.

Version 1.0.7 2026-09-11

  • Fixed A scorecard can now be taken off a dashboard: its settings window has Delete scorecard at the bottom, and a second click confirms it. Other gauges delete from their right-click panel, but a scorecard opens its own settings instead, so there was no way to remove one.

Version 1.0.6 2026-09-11

  • Changed The Windows app icon is back to the red pulse line on black, as it was before 1.0.1, on the taskbar, the Start menu, the title bar and the installer. The full BigData logo stays on the sign-in and home screens.

Version 1.0.5 2026-09-11

  • New Math channels are in the shared library. Share one from the Math Channels manager and it takes along every math channel its expression uses; the library has a new Math channels tab, and Use adds them to your own list.
  • Changed Using a shared math channel never overwrites one of yours: if you already have one with the same name, yours is kept.
  • Fixed The preview under a math expression now works when the expression uses another math channel. It used to say that channel was missing from the log, even though the channel itself computed fine.

Version 1.0.4 2026-09-11

  • New Right-click a channel in a graph legend, or its card, to change its colour. The line, its axis numbers, its name and value in the legend and its card all follow. Pick from sixteen swatches or a full colour picker, and Default colour puts it back.
  • Changed A colour you pick stays with that channel on every log you open, and is saved with a Layout.

Version 1.0.3 2026-09-11

  • Changed BigData for Windows is now digitally signed. The installer and the app show K2 Research & Development LLC as a verified publisher instead of an unknown one. On a brand-new certificate the Windows SmartScreen screen can still appear for a while and fades as more people install it.

Version 1.0.2 2026-09-11

  • Fixed The docked legend column never shows a scrollbar. When a graph is short the text steps down and busy graphs pair the tiles or switch to a compact list, and long names are abbreviated word by word instead of being cut off at the end: Estimated Acceleration reads EST ACCEL. Values are sized for the widest number each channel can show, so scrubbing never pushes one off its tile.
  • Changed The calculated channels have short names everywhere: EST ACCEL, EST SPEED, WHEEL SLIP, WHEEL SPIN and the rest.

Version 1.0.1 2026-09-11

  • Changed BigData for Windows now wears the real BigData logo: the connector and pulse mark is the app icon on the taskbar, the Start menu, the title bar and the installer, and the full logo heads the sign-in and home screens.
  • Changed The graph legends now start docked to the left of the graphs. Drag one out onto a graph to float them, as before, and that choice is remembered.

Version 1.0.0 2026-09-11

  • New The graph legends can dock to the left of the graphs the way HP Tuners shows them: drag a legend to the left edge of its graph and every graph gets a column showing the name and unit of each channel over a large value in its colour. Drag one back onto a graph to float them again.
  • Changed All the graphs dock together, so their time axes stay lined up and the cursor stays one straight line down them. The choice is remembered and saved with a Layout.

Version 0.1.46 2026-09-11

  • New The readout under the graphs now shows the log time at the cursor whenever no race zero is set, in larger numbers than the race time used. Setting a zero switches it to race time, as before.
  • Fixed The time readout keeps one width for the whole log, so the zoom bar beside it no longer shifts as the numbers change, a minus sign appears, or you set and clear the race zero.
  • Changed The zoom bar under the graphs is 10% taller.

Version 0.1.45 2026-09-11

  • Fixed On a log with hundreds of channels the channel list now draws only the rows you can see, so moving the cursor costs about the same on a 524-channel log as on a small one: a cursor frame with every live value went from about fifty milliseconds to about five, and rebuilding the list from twenty-five to under ten.
  • Changed Because the list is that cheap now, the live values keep up with the cursor on every frame again on big logs, rather than being paced to spare the machine.
  • Fixed On phones the channel list now shows its Favorites, Logged channels, Math channels and Calculated headings. They arrived in 0.1.41 but a phone-only layout rule was hiding them.

Version 0.1.44 2026-09-10

  • Fixed The cursor line now has its own layer over each graph, so moving it no longer redraws the traces. On a big log with four graphs that alone was about forty milliseconds a frame; the line itself is now under a fifth of a millisecond and keeps up with the pointer, and it stays welded to the data while you drag a graph.
  • Fixed The live values in the channel list are only refreshed for the rows on screen, and on a log with hundreds of channels they refresh about eighteen times a second instead of fighting the cursor for every frame. They always settle on the exact value once the pointer stops, and a normal-sized log still updates them every frame.

Version 0.1.43 2026-09-10

  • Fixed Moving the mouse over a graph is far lighter on the machine. Every mouse position used to rebuild all of the graphs from scratch, hundreds of times a second on a fast mouse; the crosshair and the readouts now update once per screen refresh and only repaint, which took the work behind one mouse move from about twenty milliseconds to under one.
  • Fixed Dragging the overview bar under the graphs got the same treatment, so a long drag no longer stacks up a redraw for every position the mouse reported.

Version 0.1.42 2026-09-10

  • Fixed The fourth graph is now offered on the Graph tab. The button was there only in a graph view you could reach from the old view picker, so the tab itself still stopped at three.

Version 0.1.41 2026-09-10

  • New Every channel in the list now has a star. Star one and it moves to a Favorites section at the top, and it stays starred on every log you open afterwards.
  • New The channel list is divided into Logged channels, Math channels and Calculated, each heading foldable and each showing its count. The app remembers which sections you folded, and searching always opens them so a match can never hide behind a folded heading.
  • Fixed Ticking a channel no longer throws the channel list back to the top — it stays where you were, and so does assigning one to a graph.
  • Fixed Adding a gauge to a saved dashboard no longer stops one of the gauges already on it from reading. A dashboard already saved with that fault is repaired the next time you open it.

Version 0.1.40 2026-09-10

  • Changed The manual now spells out exactly what Free and Pro include, and states plainly that the Windows and phone apps need an active Pro membership to open a log. The website says the same on its pricing and download pages.

Version 0.1.39 2026-09-10

  • New A complete manual is built into the app. Press F1, or use the Help menu, and it opens in its own window: eighteen topics with a contents list and a search box that searches the whole text, and it works offline.
  • New This version history is in the app too, under Help then What is new, and on the website.
  • New The same manual is published on alldatalogs.com/help, and the Windows app now has a download page at alldatalogs.com/download.

Version 0.1.38 2026-09-10

  • Fixed The Layout button and menu now name the layout you are actually using. Saving a layout makes it the one that comes back on your next log, and a layout that had not finished loading from your account is retried instead of forgotten.
  • Fixed The Layout menu no longer ticks a built-in gauge view while your own custom dash is on screen.
  • Fixed The Layout menu no longer jumps to the left edge of the window when the saved-layout list refreshes while it is open.

Version 0.1.37 2026-09-10

  • New A layout now remembers which gauges you were looking at. Switch layouts and the gauges switch with them, whether that is your own dash or a built-in gauge view.
  • New Graph View can show four graphs instead of three. The fourth is added above the bottom graph, so channels you already placed stay where you put them.

Version 0.1.36 2026-09-10

  • New History rows have delete buttons: the bin moves the file to the Recycle Bin or removes the copy saved in your account, the cross just drops the row from the list.
  • Fixed MegaSquirt logs are labelled MegaSquirt in History instead of CSV.

Version 0.1.35 2026-09-09

  • New The graph can be dragged past either end of the log, so a run that ends at the finish line can be pulled into the clear instead of sitting against the edge. The empty part is marked "log end".

Version 0.1.34 2026-09-09

  • Fixed Gauges placed behind a histogram now lay out around the table: beside it when they fit, otherwise below it, so a wide table stops covering them.

Version 0.1.33 2026-09-09

  • Fixed The Math Channels manager keeps a channel inserted from the "Insert channel…" list. It used to show it and then lose it, so the formula reopened with the last term missing.
  • Fixed The Functions buttons in the Math Channels manager insert again.

Version 0.1.32 2026-09-09

  • New History syncs to your account. Every log you open is saved once, listed newest first on every device you sign in to, and re-opened by clicking it. A switch in the History panel turns it off.

Version 0.1.31 2026-09-09

  • New Paged histograms work over math channels, so one table can page through Total Fuel Trim 1, 2, 3… the way it pages through mapped points.

Version 0.1.30 2026-09-09

  • Changed The viewer header stays open in the Windows app instead of hiding until you reach for it.

Version 0.1.29 2026-09-09

  • New HP Tuners .hpl files saved by VCM Scanner in the older container (versions 6 and 8) open, with real channel names and units.
  • Fixed More v7 .hpl logs decode: wider channel ids and 16-bit tags are handled.

Version 0.1.28 2026-09-09

  • Fixed Estimated acceleration no longer reads zero on a slow log. A filtering window narrower than three samples is widened to three.

Version 0.1.27 2026-09-09

  • New TDN .hpl logs with no file header open.
  • Fixed Changing a channel's filtering keeps it on the graph instead of removing it.
  • New The last custom dash you used comes back on the next log, and switching from the default gauges to custom returns to it instead of the builder.

Version 0.1.26 2026-09-09

  • Fixed The per-row tools on a channel are no longer pushed off by a long channel name.
  • New Filter buttons under the channel search box show only logged parameters, math channels or calculated channels.

Version 0.1.25 2026-09-09

  • New Per-channel smoothing: set a time window on any channel and the trace smooths without changing the underlying data.
  • New A saved gauge set remembers the graph channels that were on screen with it.
  • Changed The last layout you used comes back on the next log.

Version 0.1.24 2026-09-09

  • New Estimated acceleration: G, chassis speed, wheel slip and spin detection calculated from the log, with a settings button on the channel row.

Version 0.1.23 2026-09-09

  • Fixed Ford torque-source codes on SCT logs read as text instead of numbers.

Version 0.1.22 2026-09-09

  • New MegaSquirt and TunerStudio text logs (.msl and text .mlg) open natively.

Version 0.1.21 2026-09-09

  • Fixed Saved layouts are kept per account, and the picker shows which account they are synced to. Layouts saved under one sign-in stopped appearing under the other.

Version 0.1.20 2026-09-09

  • Changed Internal improvements.

Version 0.1.19 2026-09-09

  • Fixed Scorecard: closing the throttle at wide-open is no longer marked down on EcoBoost engines, where the blade is used for boost and torque control.

Version 0.1.18 2026-09-09

  • New Scorecard scores all ten categories from the log, with engine type and fuel pulldowns and clickable evidence that jumps to the moment in the log.

Version 0.1.17 2026-09-09

  • New Table gauge: a label-and-value list for source and status fields, with names for numeric state codes.

Version 0.1.16 2026-09-09

  • New Gauges can be placed behind the histogram table, built with the same designer as a custom dash.

Version 0.1.15 2026-09-08

  • New The owner map on a paged histogram can be judged by weight, samples, total value, peak or which page was active.

Version 0.1.14 2026-09-08

  • Fixed The live dot on a histogram follows a converted axis, so a table binned in inHg tracks correctly on a log in psi.

Version 0.1.13 2026-09-08

  • New Weighted-average histograms, and an owner map showing which page dominates each cell.

Version 0.1.12 2026-09-08

  • New Paged histograms: one table with arrows instead of one table per mapped point.

Version 0.1.11 2026-09-08

  • Fixed Narrow bar gauges keep their scale numbers.

Version 0.1.10 2026-09-08

  • Fixed Bar gauge numbers no longer overlap the bar.

Version 0.1.9 2026-09-08

  • New Haltech logs open through the CSV that NSP exports.

Version 0.1.8 2026-09-08

  • Changed Smaller names and tick numbers on custom dash gauges, so more fits on screen.

Version 0.1.7 2026-09-08

  • New Copy, duplicate and paste gauges in the dash designer.

Version 0.1.6 2026-09-08

  • Fixed Recent files are kept per account, so two sign-ins on one PC no longer see each other's logs.

Version 0.1.5 2026-09-08

  • New The shared library can be updated in place, marked as official, and filtered by car.

Version 0.1.4 2026-09-08

  • New The shared library of gauge dashboards and histograms is available in the Windows app.

Version 0.1.3 2026-09-08

  • Fixed Histograms that reference a math channel resolve it after loading a layout, instead of reporting a missing parameter.

Version 0.1.2 2026-09-07

  • Fixed Restart now finishes an update without leaving a wizard waiting for a click.

Version 0.1.1 2026-09-07

  • Fixed Releases publish reliably, so Check for updates always finds the new version.

Version 0.1.0 2026-09-07

  • New First release of BigData for Windows: the full viewer as a desktop app, with file associations, drag and drop, automatic updates, and layouts that sync to your account.